Commercial Rainwater Harvesting Products

Commercial Rainwater Harvesting is the collection, storage and filtration of reclaimed rainwater captured from the roof area of commercial buildings. Rainwater Harvesting can provide a sustainable water supply for a range of non-potable uses including toilet flushing, irrigation and vehicle wash plants.

By taking advantage of previously underutilised roof area, commercial buildings with rainwater harvesting automatically benefit from reduced mains water consumption, reduced bills, and reduced carbon emissions. Rainwater is a free, natural resource which is ready and waiting to help your organisation contribute towards water conservation goals.

With over 20 years’ experience, Stormsaver are on hand to offer a range of commercial rainwater harvesting solutions for buildings of all shapes, sizes and uses. Check out our advanced range below.

INSTALLATION SERVICES >

Non-Pressurised System

A non pressurised system will gravity feed the water to its point of use from a header tank. A storage tank (either above or below ground) with a control unit is also supplied to complete the system.

Above Ground System

Our unique StormStation provides a simple-to-install solution. Our complete arrangement provides you with an above ground tank, filtration, pumps and controls all house in one unit which can be easily retro-fitted to existing sites, installed as part of a new build, or used as a portable piece of equipment for construction site toilets.

Combi System

Our unique Combi rainwater harvesting system, is our best seller, without a doubt! Rainwater is stored awaiting distribution by the energy efficient variable speed booster set; providing water at pressure to a range of applications without the need for large header tanks, but allowing the mains water top up above ground and protecting the life of the submersible pumps.

Pressurised System

A pressurised system is similar to a non pressurised system; with the exception that water enters the control system and flows via a pressurisation unit without the need for a header tank.

Active Attenuation

The Stormsaver Active Attenuation brings together Attenuation and Rainwater Harvesting thanks to Stormharvester weather prediction technology. The system counts towards 100% of attenuation volumes on-site at the same time as harvesting and re-using rainwater for a range of applications.