Pressurised Rainwater Harvesting System

More information about Pressurised Rainwater Harvesting Systems

Pressurised Rainwater Harvesting Systems can provide a secondary sustainable water supply for non-potable applications, including;

• Toilet and urinal flushing
• Irrigation and living wall watering
• Wash down and cleaning
• Cooling and conditioning
• Manufacturing and industrial use

Stormsaver is the only supplier of commercial rainwater harvesting with systems that are manufactured in the United Kingdom by an in-house team. Alternative suppliers of rainwater harvesting purchase their systems from Europe resulting in a potential 14-week lead time for replacement parts for end users. Championing UK manufacturing means we can offer the most bespoke solutions on the market.

Pressurised Rainwater Harvesting is reliant on a pressure vessel to provide a boosted supply across the building. The pressure vessel should receive bi-annual servicing as part of planned preventative maintenance by the end user to minimise the risk of pressure vessel failure. When specifying a Pressurised Rainwater Harvesting System it is important to fully understand the failsafe implications for the end user should the pressure vessel fail. Alternatively, a Non-Pressurised Rainwater Harvesting System may be the preferred solution for buildings with critical operations. Contact our team here who can advise on the best rainwater harvesting solution for your site requirements.

Available System Arrangements

Stormsaver can supply two different varieties of control panels depending on your site requirements.

Automatic Backwash Control Panel

Take advantage of reduced maintenance requirements.

Stormsaver can supply Pressurised Control Panels with Automatic Backwash Filtration. Automatic Backwashing pushes a high-pressure supply of sustainable water in the reverse direction through the filter to send any excess debris to the drain. The process occurs for 10 seconds when a drop in pressure is detected or every 24 hours to provide a high-quality sustainable water supply.

Automatic Backwash Filtrations removes the requirement for single-use cotton wound filters which require physical replacement by the end user of the building when the filter becomes blocked debris. Stormsaver Automatic Backwashing has been tested for up to 1 million backwashes.

Stormsaver has a range of control panels for automatic backwashing dependent on the required flow rate. Our team will specify the best solution for your requirements.