Available System Arrangements
Stormsaver Non-Pressurised Rainwater Harvesting Systems can be supplied with two different varieties of control panels depending on the site requirements. Below is a summary of both types of control panels.
Automatic Backwash Control Panel
Automatic Backwashing is the best solution for end users.
Stormsaver can supply Non-Pressurised Control Panels with Automatic Backwash Filtration. Automatic Backwashing pushes a high-pressure supply of sustainable water through the filter to remove any debris and transports the wastewater to the drain. The process is controlled by our control panel and occurs for 10 seconds when a pressure drop is detected in the system or every 24 hours to provide a high-quality sustainable water supply.
Automatic Backwash Filtrations eliminates more common cotton wound filters which require physical replacement by the end user of the building when the filter becomes blinded. Stormsaver Automatic Backwashing has been certified for 1 million backwashes. The technology is regularly specified by consultants and is a firm favourite among end users.
Stormsaver has a range of control panels for automatic backwashing dependent on the required flow rate. Our team will specify the best solution for your requirements. As a guide, our Singlex control panel can provide 1 litre per second, our Duplex control panel can provide 2 litres per second, and our Triplex control panel can provide 3 litres per second. All data sheets for these options can be downloaded below.