The Chancellor has ruled out major changes to the Building Regulations for the rest of this Parliament. The tighter water efficiency standards proposed for Part G are therefore unlikely to arrive nationally any time soon.
Water efficiency requirements are not going away, though. They are moving to local plans, and the August 2026 National Planning Policy Framework (NPPF) gives councils the footing to set them.
What the Chancellor announced
In the Budget on 28 October 2026, John Healey said there would be no major changes to the Building Regulations in this Parliament, except where critical for safety. The stated aim is to speed up housebuilding by ending constant regulatory change.
What this means for Part G
Defra consulted from September to December 2025 on amending Part G2, the water efficiency standard in the Building Regulations 2010. The current standard sets a limit of 125 litres per person per day, with a tighter optional standard available. The consultation proposed water-saving features such as aerated taps and showerheads, and dual flush toilets, in all new homes.
Those proposals were meant to tighten national standards and encourage more water reuse. With the freeze in place, they are now unlikely to be implemented in this Parliament.
Stormsaver’s view
The announcement is disappointing news, particularly as the proposed amendments to Part G of the Building Regulations (Water Efficiency) were intended to introduce tighter water efficiency standards and encourage greater water reuse.
From a national policy perspective, this is undoubtedly a setback. However, all is not lost in the short term.
Although we may not see tighter water efficiency standards introduced through national Building Regulations, there remains an opportunity to drive progress at a local planning level.
In August 2026, the UK Government published the latest National Planning Policy Framework (NPPF), which provides the framework within which local authorities develop their local plans and planning policies.
Importantly, this means that local authorities can, where justified, establish their own water efficiency requirements for new developments through local planning policy.
Cambridge provides a good example of this approach. Its local planning policies require new non-residential developments to secure all credits under the Water (Wat 01) category of BREEAM, which includes requirements relating to water reuse. The adopted plan also sets a minimum BREEAM rating of Excellent.
Our plan is to collate and review the water efficiency requirements within local plans across the country, giving us a clearer picture of where stronger standards are already being implemented.
Why local plans now matter more
The NPPF was published on 17 August 2026 and took effect immediately. It generally steers local plans away from repeating matters already covered by the Building Regulations. Water efficiency is one of the named exceptions, alongside energy efficiency and accessibility standards.
In practice, councils can set water efficiency standards above the national baseline where local circumstances and pressure on water supplies justify it.
The word “justified” matters. A council needs evidence, usually from its water resources management plan, the water company and the Environment Agency’s water stress designations. Areas in serious water stress have the strongest case.
Timing also favours this route. The new NPPF puts councils on a tighter plan-making timetable, so a wave of new and updated local plans is coming. Each one is a chance to write in water efficiency policy.
What developers and specifiers should do
Check the local plan before the site search ends. Water efficiency requirements now vary from one authority to the next, and they can change with each plan update.
Plan for water reuse at design stage. Wat 01 scores a building’s water consumption. Cutting mains demand with rainwater harvesting or greywater recycling is one of the more direct routes to full credits. Retrofitting after a BREEAM pre-assessment is slower and costlier.
What we are tracking next
Stormsaver is collating the water efficiency requirements in local plans across the country. The aim is a clear picture of which authorities already hold developers to stronger standards, and which are likely to follow.
If your project sits in an area with a tighter local requirement, or you want to know what applies to a site you are considering, we can help. Get in touch with our team to find out more.