“We installed the Stormsaver domestic rainwater harvesting system 8 years ago. The savings on our mains water consumption have been amazing. We are a 4 person household, with 2 kids so lots of baths and clothes washing! We use around 56m3 of mains water a year the same as an average single person household without rainwater harvesting. Our systems provides rainwater for toilets, laundry and irrigation and has reduced our water bill over £200 a year. I specialise in designing and building low energy housing and it is important that I not only research the best available products, but actual experience using them. The Stormsaver system has been simple to install and maintain with very good after market care, I will be using their product again.”
Monsoon Eco System
The Monsoon Eco 10 Rainwater Harvesting System is the perfect economical harvesting system. Designed to save even more energy with low consumption, the Eco 10 is suitable for a wide array of homes and can be used for toilet flushing, washing machines and garden watering.
Reduce water consumption by up to 50% and save on bills
Harvested rainwater will collect and automatically be used for toilet flushing, laundry, garden watering, etc. The result will be up to 50% less usage and cheaper bills.
Because our system uses a 90W suction pump, rather than an 800W submersible pump it is the lowest energy system on the market, costing no more than £2 per year to run. Plus it can be connected to a solar panel, reducing running costs to nothing.
It runs on a DC power supply
Why is this so important? Well it means that the system can be connected to a battery back up so if your power should fail the control panel will still run ensuring a continuous water supply
WRAS Approved Mains water top up to the control panel, not the tank
This means that the mains water top up can be accessed if there is a problem. Also, if you can hear the mains water running constantly you know that you have a leak. With a mains water top up below ground the first you will know about it is a huge water bill!
Quick and easy to install and start collecting
Installation is neither difficult nor complex. Our tanks are designed for shallow depths, meaning no heavy equipment is required and setting up your system is quick and disturbance free and we do not need to remove large amounts of earth from the site.
Tailored to your specific requirements
Stormsaver’s rainwater harvesting systems are available in a range of sizes and options. This means our system will be specifically tailored for your household needs, ensuring you have the right system at the right cost.
Suitable for high water tables
Stormsaver’s rainwater harvesting systems are suitable for high water tables. Unlike some systems we can accomodate for properties with high water tables.
Get Started Today
Were confident that we can provide the right solution for you. For more information or to get a full quote, please contact us today on 0844 884 0015 or firstname.lastname@example.org. Alternatively, you can request a quote online.