“We installed the Stormsaver domestic rainwater harvesting system 8 years ago. The savings on our mains water consumption have been amazing. We are a 4 person household, with 2 kids so lots of baths and clothes washing! We use around 56m3 of mains water a year the same as an average single person household without rainwater harvesting. Our systems provides rainwater for toilets, laundry and irrigation and has reduced our water bill over £200 a year. I specialise in designing and building low energy housing and it is important that I not only research the best available products, but actual experience using them. The Stormsaver system has been simple to install and maintain with very good after market care, I will be using their product again.”
Can I connect the system to a BMS (Building Management System?
Each Stormsaver system has a common alarm to connect to the BMS as standard, however we can upgrade this option if required to provide signal readouts for low level contents, contents 0-100%, pump operation, pump run time, flow rate, flow in litres for rainwater and mainswater, filter clean operation, UV disinfection alarm, low flow… if these aren’t enough ask our technical team on 0844 884 0015 and we can add other bespoke items such as temperature, high level alarms etc to your specification. Installation