“We installed the Stormsaver domestic rainwater harvesting system 8 years ago. The savings on our mains water consumption have been amazing. We are a 4 person household, with 2 kids so lots of baths and clothes washing! We use around 56m3 of mains water a year the same as an average single person household without rainwater harvesting. Our systems provides rainwater for toilets, laundry and irrigation and has reduced our water bill over £200 a year. I specialise in designing and building low energy housing and it is important that I not only research the best available products, but actual experience using them. The Stormsaver system has been simple to install and maintain with very good after market care, I will be using their product again.”
Please feel free to download any documents listed on this section of our web site.
If you are looking for a drawing to show how the complete system works. you can find a selection of these in this section
Stormsaver provide a range of SUDS solutions with our attenuation and infiltration products
The Pre-tank filter is the first stage of filtration with our rainwater harvesting system. Data sheets for our range of pre-tank filters can be found in this section
There are many types of rainwater harvesting storage tanks available to you. In this section you will find all the data sheets for the different options, but please contact us to discuss which would be most suitable if you are not sure.
All our pumps are the highest quality stainless steel. In this section you will find all the data sheets for the different options of pumps and filters, but please contact us to discuss which would be most suitable if you are not sure.
Stormsaver provide the most reliable, adaptable and intelligent control panels for rainwater harvesting in the UK market. It is what we pride ourselves on. In this section you will find all the data sheets for the different options, but please contact us to discuss which would be most suitable if you are not sure.
Our header tank range can come in any shape or size and in either a single piece or sectional arrangment. If your specification calls for a pressure vessel, this section is where you will find the data. Please contact us if you are not sure which solution is best for you.
In some buildings, UV disinfection is called for. Stormsaver recommend UV where the young, eldery or poorly may be using appliances supplied with rainwater. Our range goes from 0.63L per second to 8.4L as standard but we can provide higher flow rates on request. You can find the information in this section.
Stormsaver provide additional water meters and monitoring solutions for our rainwater harvesting systems. Our Educational monitoring unit with Learning package is particularly popular with schools. The data sheets can be found here.