There's nothing off-the-shelf with a Stormsaver rainwater harvesting system. Each one is bespoke and designed to meet your site-specific requirements.
Rainwater Storage Tank
Stormsaver provides a range of Rainwater harvestang storage tanks, including:
• Underground single chamber tank (1,000 – 150,000 litres), incorporating an integrated Vortex Filter
• Above ground sectional tank (1,000 – 200,000 litres)
• Above ground single piece tank either vertical or horizontal (1,000 – 150,000 litres)
To create larger capacities tanks can be linked together with the fittings supplied.
All tanks come with an integrated Vortex Filter, a 180 micron floating suction filter, inlet calmer, pre-molded inlets and outlets located and orientated to suit local site drainage, a back pressure valve / rodent guard and lockable cover.
Rainwater Header Tank (suitable for our non-pressurised system)
• The tank has been designed to be compliant with the Water Supply (Water Fittings) Regulations 1999 to protect the integrity of the mains water supply
• WRAS compliant non-corrosive tanks
• Pre-installed insulation 25mm as standard – 50mm/ 75mm on request
• Single piece tank. Standard or bespoke dimensions in 100 – 10,000 litres as single piece or 1,000 – 200,000 litres installed as sectional design
• Tanks are fitted with level sensors, inlet valves and supplied with a mains water failsafe control valve to provide continuity of supply if power fails
• Tanks can be fitted with multiple sections for drain down/ maintenance
• Multiple header tanks can be incorporated into the building design
Rainwater Harvesting Control Panel
• Self-contained unit incorporating automated filtration and system control
• Automated self-cleaning filter unit to 50 microns
• Pre-wired electrics for ease of installation
• Pre-plumbed pipe work for easy connection
• Option to connect to a variety of Building Management Systems to provide information about the system, such as how much rainwater or mains water has been used and details of pump operation and filter cleaning.
• Instructions inside the panel for ease of installation and operation
• Option to connect to multiple tanks and multiple header tanks
Rainwater Harvesting Pumps
• Stainless steel submersible pumps for 0.8 – 18 litres a second at a maximum of variable head, with stainless steel lifting rope, run dry protection and silent, anti-drumming design
• Duty and stand-by or duty assist systems available
• Other pumps are available for specialist site specificationsStormsaver takes all of the vital factors into account when developing a rainwater harvesting solution. We look at the roof area of your building, local rainfall, water demand and occupancy levels, any existing specification or site-specific requirements, filter co-efficients and your budget.
With the system requirements defined, we will custom-build and test each and every component.
To request a data sheet and/or technical drawings simply contact us.